Education/CredentialsPh. D.: University of Pennsylvania (Mechanical Engineering & Applied Mechanics)M. Tech.: Indian Institute of Technology (Mechanical Engineering)B. Tech.: Indian Institute of Technology (Mechanical Engineering) Contact Information Rhodes Hall 598 Email jogma@ucmail.uc.edu Research InterestsMy group conducts fundamental and applied research in fluid mechanics, heat and mass transport at multiple scales and with multiple phases using both computational and experimental techniques. In particular, my research interests are: Liquid Atomization and Spray Systems Interfacial Phenomena and Phase Change Heat Transfer Computational Fluid Mechanics, Heat and Mass Transfer Plasma Heat Transfer Heat Transfer Enhancement Peer Reviewed Publications Kannan, S., Jog, M. A., and Manglik, R.M., 2024. High Power Density Thermal Energy Storage with Phase Change Material in Enhanced Compact Heat Exchangers ASME Journal of Heat and Mass Transfer, 146 5, 052402Kannan, S., Jog, M. A., and Manglik, R.M., 2023. Experimental Study of Enhanced Heat Transfer in Phase Change Material Based Thermal Energy Storage in Compact Heat Exchangers Proceedings of the Summer Heat Transfer Conference, Paper Number SHTC2023-107111 , Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., 2023. Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations ASME Journal of Heat and Mass Transfer, 145 9, 091003Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., 2023. Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations ASME Journal of Heat and Mass Transfer, 145 9, 091003Rajendran, S., Jog, M. A., and Manglik, R. M. 2023. Predicting Splash of a Drop Impacting a Thin Liquid Film Langmuir, 39 41, 14764-14773Manglik R.;Patel P.;Jog M. 12-17-2012. Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 2, fluid flo Journal of Enhanced Heat Transfer, 19 5, 437-450Patel P.;Manglik R.;Jog M. 12-17-2012. Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 1, fluid flo Journal of Enhanced Heat Transfer, 19 5, 423-436 Lin K.T.; Shi D.; Jog M.A.; Manglik R.M. 12-01-2020. General Correlations for Laminar Flow Friction Loss and Heat Transfer in Plain Rectangular Plate-Fin Journal of Heat Transfer, 142 12, Volk A.;Ghia U.;Jog M. 12-01-2018. How Computational Grid Refinement in Three Dimensions Affects Computational Fluid Dynamics-Discrete Journal of Fluids Engineering, Transactions of the ASME, 140 12, Yan K.;Jog M.;Ning Z. 12-01-2013. Nonlinear spatial instability of an annular swirling viscous liquid sheet Acta Mechanica, 224 12, 3071-3090Abdelaal M.;Jog M. 12-01-2012. Effect of viscosity ratio on the electric-field-driven enhancement of heat/mass transfer to a spheri ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 PARTS A, B, C, D, 673-678Manglik R.;Patel P.;Jog M. 12-01-2012. Enhanced laminar flow convection heat transfer in longitudinally twisted rectangular ducts ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 2 , 95-101Miller E.;Patnaik S.;Jog M. 12-01-2012. Dynamic modeling of vapor compression cycles using a novel lagrangian approach ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 2 , 1023-1032Miller E.;Patnaik S.;Jog M. 12-01-2012. System dynamic modeling of vapor compression cycles ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 1 , 27-35Yan K.;Jog M.;Ning Z. 12-01-2012. Nonlinear instability analysis of an annular swirling viscous liquid sheet ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 PARTS A, B, C, D, 2437-2444Verma U.;Manglik R.M.;Jog M.A. 12-01-2011. Experimental study of effects of interfacial properties on nucleate pool boiling in water ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 10 PARTS A AND B, 779-785Huzayyin O.;Jog M.;Manglik R. 12-01-2010. Low Reynolds number air-flow heat transfer in trapezoidally corrugated perforated plate-fin ducts ASHRAE Transactions, 116 PART 2, 339-346Huzayyin O.;Manglik R.;Jog M.;Asme M. 12-01-2010. Extended results for fully developed laminar forced convection heat transfer in trapezoidal channels Journal of Thermal Science and Engineering Applications, 2 4, Jog M.;Manglik R. 12-01-2010. Experimental investigation of low weber number post-impact drop spreading on solid substrates 2010 14th International Heat Transfer Conference, IHTC 14, 6 , 811-817Manglik R.M.;Jog M.A. 12-01-2009. Molecular-to-large-scale heat transfer with multiphase interfaces: Current status and new directions Journal of Heat Transfer, 131 12, 1-11Gatne K.;Manglik R.;Jog M. 12-01-2007. Molecular-scale reagent transport-induced modification of low weber number droplet impact dynamics 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 1 , 741-747Kasimsetty S.;Subramani A.;Manglik R.;Jog M. 12-01-2007. Theoretical modeling and experimental measurements of single bubble dynamics from a submerged orific 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 3 , 9-17Subramani A.;Kasimsetty S.;Manglik R.;Jog M. 12-01-2007. Computational and experimental characterization of single bubble dynamics in isothermal liquid pools 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, 2 FORA PART B, 1481-1482Ibrahim A.;Jog M. 12-01-2005. Modeling of gas-liquid flow in pressure swirl atomizers American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 261 FED , 427-436Ibrahim A.;Jog M. 12-01-2005. Weakly nonlinear instability of an annular liquid sheet subjected to unequal inner and outer gas str Energy Conversion and Resources 2005, 2005 , 251-257Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. 12-01-2005. Enhancement of heat transfer due to plasma flow in material processing applications American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 376 HTD 2, 889-893Subramanian R.;Jog M. 12-01-2005. Droplet heating in a direct-contact heat exchanger: Effect of electric field American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 376 HTD 1, 589-593 Benjamin M.; Jeng S.; Jog M.; Steinthorsson E.; Xue J. 12-01-2002. Computational model to predict flow in simplex fuel atomizer 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Zhang Q.;Jog M. 12-01-2002. Kinetic theory treatment for heat transfer in plasma spraying American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 372 5, 21-24 Benjamin M.; Jeng S.; Jog M.; Liao Y. 12-01-2001. On the mechanism of pressure-swirl airblast atomization 37th Joint Propulsion Conference and Exhibit, , Samudran S.;Jog M. 12-01-2001. A model to evaluate heat transfer to a particle from thermal plasma American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 369 6, 359-361Liao Y.;Jeng S.;Jog M.;Benjamin M. 12-01-2000. The effect of air swirl profile on the instability of a viscous liquid jet Journal of Fluid Mechanics, 424 , 1-20Wasekar V.;Manglik R.;Jog M. 12-01-2000. Numerical investigation of marangoni convection around a vapor bubble in aqueous surfactant solution American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 366 , 283-291Liao Y.;Jeng S.;Jog M.;Benjamin M. 12-01-1999. Air swirl effect on the instability of a viscous liquid jet Proceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM), , 1 Benjamin M.; Jeng S.; Jog M.; Liao Y. 12-01-1998. Atomization of a liquid jet under swirling air stream SAE Technical Papers, , Jog M.;Alam M. 12-01-1998. Transport Phenomena in Rapid Solidification Processing American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-4 , 255Verma A.;Jog M.A. 12-01-1998. Analysis of heat transfer to a spectrum of particles in plasma spray coating process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-364 4, 287-294Hader M.A.;Verma A.;Jog M.A. 12-01-1997. Numerical investigation of heat transfer to a non-spherical drop suspended in an electric field: Int American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 342 , 59-66Harms T.;Jog M.;Manglik R. 12-01-1997. Numerical predictions of laminar fully developed forced convection in a semi-circular duct with temp American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 348 , 31-38Jog M. 12-01-1995. Analysis of heat transfer to a spherical particle from continuum plasma Journal of Applied Physics, 78 3, 1424-1429Jog M.;Huang L. 12-01-1995. Analysis of particle heating in plasma spray coating process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 317-2 , 503-509Jog M.;Huang L. 12-01-1994. Effect of particle loading on heat transfer in plasma coating process American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 201 , 25-31Jog M.;Ayyaswamy P.;Cohen I. 12-01-1993. Influence of elasto-plastic behavior of epoxy on stresses and strains in tab packaging American Society of Mechanical Engineers, EEP, 4-1 , 83-89Jog M.;Cohen I.;Ayyaswamy P. 12-01-1991. Heat transfer in electric arc welding American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, 51 , 135-142Jog M.;Cohen I.;Ayyaswamy P. 12-01-1991. Analysis and simulation of thermal transients and resultant stresses and strains in tab packaging American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 131 , 137-142Huang L.;Jog M.;Cohen I.;Ayyaswamy P. 12-01-1990. Effect of polarity on heat transfer in the ball formation process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 146 , 1-8 Kannan S.; Kumar N.; Jog M.A.; Manglik R.M. 11-02-2022. Phase-Transition Efficacy and Material Compatibility with Thermal Cycling of Lithium Nitrate Trihydr Industrial and Engineering Chemistry Research, 61 43, 16341-16351Verma A.;Jog M.A. 10-15-1999. Plasma flow over an array of particles International Journal of Heat and Mass Transfer, 43 1, 101-111 Manoharan S.; Manglik R.M.; Jog M.A. 10-01-2021. Wetting and Capillarity Effects on Bubble Formation from Orifice Plates Submerged in Pools of Water Journal of Heat Transfer, 143 10, Mandal A.;Jog M.;Xue J.;Ibrahim A. 10-01-2008. Flow of power-law fluids in simplex atomizers International Journal of Heat and Fluid Flow, 29 5, 1494-1503Ibrahim A.;Jog M. 10-01-2007. Nonlinear breakup model for a liquid sheet emanating from a pressure-swirl atomizer Journal of Engineering for Gas Turbines and Power, 129 4, 945-953Ibrahim A.;Jog M. 10-01-2006. Effect of liquid and air swirl strength and relative rotational direction on the instability of an a Acta Mechanica, 186 1-4, 113-133Reddy G.;Kandell B.;Jog M.;Sekhar J. 10-01-2006. Low ionization plasma sources for enhanced aluminum processing for energy savings, environmental ben Industrial Heating, 73 10, 49-52Subramanian R.;Jog M. 10-01-2005. Enhancement of heat transfer by an electric field for a drop translating at intermediate Reynolds nu Journal of Heat Transfer, 127 10, 1087-1095Wen Y.;Jog M. 10-01-2005. Variable property, steady, axi-symmetric, laminar, continuum plasma flow over spheroidal particles International Journal of Heat and Fluid Flow, 26 5, 780-791Jeddy F.;Jog M.;Sekhar J.;Markle R.;Sarvepalli V.;Burada R. 10-01-1999. Convective heating below 1000°C Advanced Materials and Processes, 156 4, 213-215Kasimsetty S.;Manglik R.;Jog M. 09-21-2009. Computational modeling of dynamics of single bubbles emanating from capillary-tube orifice in an iso ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART C, 1933-1940Venkata P.;Jog M.;Manglik R. 09-15-2009. Computational modeling of planar SOFC: Effects of volatile species/oxidant mass flow rate and electr ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART A, Chen H.; Jog M.A.; Evans D.E.; Turkevich L.A. 09-01-2021. Numerical investigation of powder aerosolization in a rotating drum apparatus Powder Technology, 390 , 62-72Jog M.;Ayyaswamy P.;Cohen I. 09-01-1996. Effect of elasto-plastic behavior of epoxy on thermal stresses in TAB packaging International Journal of Microcircuits and Electronic Packaging, 19 3, 308-315Manglik R.;Jog M.;Gande S.;Ravi V. 08-26-2013. Damped harmonic system modeling of post-impact drop-spread dynamics on a hydrophobic surface Physics of Fluids, 25 8, Abdelaal M.;Jog M. 08-14-2013. Heat/mass transport in a drop translating in time-periodic electric fields International Journal of Heat and Mass Transfer, 66 , 284-294Bhagat K.;Reddy G.;Jog M.;Aust R.;Vasudevan V.;Sekhar J. 08-01-2007. A technique to determine the emissivity with the temperature of a Fe-5.8 Pct Al-22 pct Cr alloy Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 38 4, 725-728Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. 08-01-2006. Heat-transfer enhancement using weakly ionized, atmospheric pressure plasma in metallurgical applica Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 37 4, 565-570Fang P.;Manglik R.;Jog M. 07-31-1999. Characteristics of laminar viscous shear-thinning fluid flows in eccentric annular channels Journal of Non-Newtonian Fluid Mechanics, 84 1, 1-17Gatne K.P.;Jog M.A.;Manglik R.M. 07-21-2009. Surfactant-induced modification of low weber number droplet impact dynamics Langmuir, 25 14, 8122-8130Reddy G.S.;Jog M.;Sekhar J.A. 07-17-2008. Innovation with low-lonizationll plasma sources for enhanced aluminum processing Key Engineering Materials, 380 , 209-225 Chen H.; Turkevich L.A.; Jog M.A.; Ghia U. 07-01-2023. Numerical investigation of powder aerosolization in a mining rock dust dispersion chamber Journal of Loss Prevention in the Process Industries, 83 , Ibrahim A.;Jog M. 07-01-2008. Nonlinear instability of an annular liquid sheet exposed to gas flow International Journal of Multiphase Flow, 34 7, 647-664Ibrahim A.;Jog M.;Jeng S. 06-29-2006. Effect of liquid swirl-velocity profile on the instability of a swirling annular liquid sheet Atomization and Sprays, 16 3, 237-263 Rajendran S.; Manglik R.M.; Jog M.A. 06-01-2022. New Property Averaging Scheme for Volume of Fluid Method for Two-Phase Flows with Large Viscosity Ra Journal of Fluids Engineering, Transactions of the ASME, 144 6, Tharakan T.J.;Mukhopadhyay A.;Datta A.;Jog M.A. 06-01-2013. Trends in comprehensive modeling of spray formation International Journal of Spray and Combustion Dynamics, 5 2, 123-180Yerra K.;Manglik R.;Jog M. 06-01-2007. Optimization of heat transfer enhancement in single-phase tubeside flows with twisted-tape inserts International Journal of Heat Exchangers, 8 1, 117-138Rajamohan D.;Banerjee R.;Back L.;Ibrahim A.;Jog M. 06-01-2006. Developing pulsatile flow in a deployed coronary stent Journal of Biomechanical Engineering, 128 3, 347-359 Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 05-01-2022. Role of Three-Dimensional Swirl in Forced Convection Heat Transfer Enhancement in Wavy-Plate-Fin Cha Journal of Heat Transfer, 144 5, Jog M.;Banerjee D. 05-01-2019. Frontiers, Fundamentals, and Future Directions of Transport: From Theory to Applications - A Special Journal of Heat Transfer, 141 5, Manoharan S.;Deodhar A.M.;Manglik R.M.;Jog M.A. 05-01-2019. Computational Modeling of Adiabatic Bubble Growth Dynamics from Submerged Capillary-Tube Orifices in Journal of Heat Transfer, 141 5, Anand S.;Lee J.;Veettil D.;Son S.;Jog M. 04-07-2011. Distribution of vapor inside a cylindrical minichannel with evaporative walls and its effect on drop Journal of Thermal Science and Engineering Applications, 3 1, Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 04-01-2023. Experimental and Computational Study of Enhanced Forced Convection Heat Transfer in Novel Slotted Wa Journal of Heat Transfer, 145 4, Abdelaal M.;Jog M. 04-01-2012. Heat/mass transfer from a drop translating in steady and time-periodic electric fields: External pro International Journal of Heat and Mass Transfer, 55 9-10, 2315-2327Athavale A.;Manglik R.;Jog M. 03-01-2012. An experimental investigation of nucleate pool boiling in aqueous solutions of a polymer AIChE Journal, 58 3, 668-677 Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 02-01-2021. Characterization and Scaling of Forced Convective Swirl in Sinusoidal Wavy-Plate-Fin Cores of Compac Journal of Heat Transfer, 143 2, Jog M.;Ayyaswamy P.;Cohen I. 01-25-1996. Evaporation and combustion of a slowly moving liquid fuel droplet: Higher-order theory Journal of Fluid Mechanics, 307 , 135-165Abdelaal M.;Jog M. 01-15-2012. Steady and time-periodic electric field-driven enhancement of heat or mass transfer to a drop: Inter International Journal of Heat and Mass Transfer, 55 1-3, 251-259 Chen H.; Jog M.A.; Turkevich L.A. 01-01-2023. Computational fluid dynamics simulations of aerosol behavior in a high-speed (Heubach) rotating drum Particuology, 72 , 68-80 Kannan S.; Jog M.A.; Manglik R.M. 01-01-2019. The effects of nucleating agents on phase transition of a salt hydrate phase-change material for the ASME 2019 Heat Transfer Summer Conference, HT 2019, collocated with the ASME 2019 13th International Conference on Energy Sustainability, , Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 01-01-2019. Three-dimensional computations for forced convection of air in offset-strip fin channels: Effects of ASHRAE Transactions, 125 , 172-180Gokhale O.;Jog M.;Manglik R. 01-01-2018. Experimental study of chamber volume effect on bubble formation from orifice plates submerged in wat ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 , Lin K.T.;Jog M.A.;Manglik R.M. 01-01-2018. Computational modeling of single-phase laminar flow heat transfer in complex plate-fin ducts International Heat Transfer Conference, 2018-August , 5381-5388Shi D.;Jog M.A.;Manglik R.M. 01-01-2018. Computational modeling of low Reynolds number air flows in wavy-plate-fin channels: Contribution of International Heat Transfer Conference, 2018-August , 5123-5530Bhave C.;Manglik R.;Jog M. 01-01-2017. Computational study of enhanced convection and effects of geometrical features in offset strip fin c ASME 2017 Heat Transfer Summer Conference, HT 2017, 2 , Jog M. 01-01-2017. Applications: Heat transfer in plasma sprays CRC Handbook of Thermal Engineering, Second Edition, , 1003-1016Manoharan S.;Jog M.;Manglik R. 01-01-2017. Effects of liquid viscosity on bubble growth from submerged orifice plates ASME 2017 Heat Transfer Summer Conference, HT 2017, 2 , Rajendran S.;Jog M.;Manglik R. 01-01-2017. Experimental investigation of jet breakup at low Weber number Atomization and Sprays, 27 9, 821-834Manglik R.;Jog M. 01-01-2016. Resolving the energy-water nexus in large thermoelectric power plants: A case for application of enh Journal of Enhanced Heat Transfer, 23 4, 263-282Manoharan S.;Jog M.;Manglik R. 01-01-2016. Visual observations of chamber volume effect on ebullience from submerged orifice plates American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 1B-2016 , Abdelaal M.;Huzayyin O.;Jog M. 01-01-2015. Heat/Mass transfer to a drop translating in a perpendicular electric field ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7A-2015 , Manoharan S.;Kalaikadal D.;Manglik R.;Jog M.;Iskrenova-Ekiert E.;Patnaik S. 01-01-2015. Visualization of multiscale processes - Bubble dynamics in surface active colloids Journal of Heat Transfer, 137 8, Rajendran S.;Jog M.;Manglik R. 01-01-2015. Numerical analysis of liquid breakup and drop generation in low velocity jets ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3-2015 , Rojatkar P.;Jog M.A.;Jeng S.M. 01-01-2015. Numerical study of flow through 3x3 multiswirler arrays with CO and counter swirler arrangements Proceedings of the ASME Turbo Expo, 4B , Bishara F.;Jog M.;Manglik R. 01-01-2014. Heat transfer enhancement due to swirl effects in oval tubes twisted about their longitudinal axis Journal of Enhanced Heat Transfer, 20 4, 289-304Rojatkar P.;Kao Y.H.;Jog M.A.;Jeng S.M. 01-01-2014. Effect of swirler offset on aerodynamics of multiswirler arrays Proceedings of the ASME Turbo Expo, 4B , Manglik R.;Huzayyin O.;Jog M. 01-01-2011. Fin effects in flow channels of plate-fin compact heat exchanger cores Journal of Thermal Science and Engineering Applications, 3 4, Bishara F.;Jog M.;Manglik R. 01-01-2010. Heat transfer and pressure drop of periodically fully developed swirling laminar flows in twisted tu ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART B, 1131-1137Huzayyin O.;Jog M.;Manglik R. 01-01-2010. Computational modeling of convective heat transfer in converging-diverging plate channels with fin-w ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART B, 1173-1181Vyas S.;Manglik R.;Jog M. 01-01-2010. Visualization and characterization of a lateral swirl flow structure in sinusoidal corrugated-plate Journal of Flow Visualization and Image Processing, 17 4, 281-296Bishara F.;Jog M.;Manglik R. 01-01-2009. Computational simulation of swirl enhanced flow and heat transfer in a twisted oval tube Journal of Heat Transfer, 131 8, 1Jog M.;Manglik R. 01-01-2009. Recent research in molecular-to-large-scale heat transfer with multiphase interfaces and their appli Journal of Heat Transfer, 131 12, 1Sanjeev A.;Huzayyin O.;Gatne K.;Manglik R.;Jog M. 01-01-2008. Short time impact and cooling of water droplets impinging on hydrophobic and hydrophilic surfaces Journal of Heat Transfer, 130 8, 1Subramani A.;Jog M.;Manglik R. 01-01-2008. Air-water ebullience systems: Visualizing single bubble to wave instability signatures Journal of Heat Transfer, 130 8, 1Gatne K.;Manglik R.;Jog M. 01-01-2007. Visualization of fracture dynamics of droplet recoil on hydrophobic surface Journal of Heat Transfer, 129 8, 931Subramani A.;Jog M.;Manglik R. 01-01-2007. Experimental study of single-bubble dynamics in isothermal liquid pools: Effects of fluid properties ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8 , 1639-1645Gatne K.;Jog M.;Manglik R. 01-01-2006. Experimental investigation of droplet impact dynamics on solid surfaces: Spreading and recoil effect American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , Ibrahim A.;Jog M. 01-01-2006. Breakup model for annular liquid sheets American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, , Ibrahim A.;Jog M. 01-01-2006. Nonlinear breakup of a coaxial liquid jet in a swirling gas stream Physics of Fluids, 18 11, Manglik R.;Jog M.;Liu Y. 01-01-2006. Linkage between learning styles and design engineering perceptions of undergraduate students Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education, , Manglik R.;Jog M.;Liu Y. 01-01-2006. Linkage between learning styles and design engineering perceptions of undergraduate students American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , Manglik R.;Jog M.;Subramani A.;Gatne K. 01-01-2006. Mili-Scale visualization of bubble growth-translation and droplet impact dynamics Journal of Heat Transfer, 128 8, 736Rajamohan D.;Ibrahim A.A.;Back L.H.;Jog M.A.;Banerjee R.K. 01-01-2004. Evaluation of modified oscillatory shear index and recirculation zone in a deployed coronary stent Advances in Bioengineering, BED, , 35-36Xue J.;Jog M.;Jeng S.;Steinthorsson E.;Benjamin M. 01-01-2004. Effect of geometric parameters on simplex atomizer performance AIAA Journal, 42 12, 2408-2415Holcomb M.;Slusher S.;Rajamohan D.;Back L.;Jog M.;Banerjee R. 01-01-2003. Basal to near hyperemic pulsatile flow in a deployed coronary stent American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, 55 , 81-82Wen Y.;Jog M. 01-01-2003. Effect of temperature dependent properties and particle shape on heat transfer in plasma flow American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 374 3, 217-220Zhang Q.;Jog M. 01-01-2002. Kinetic theory treatment for heat transfer in plasma spraying ASME International Mechanical Engineering Congress and Exposition, Proceedings, 5 , 21-24Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-2001. Advanced sub-model for airblast atomizers Journal of Propulsion and Power, 17 2, 411-417Liao Y.;Jeng S.;Jog M.;Benjamin M. 01-01-2000. Instability of an annular liquid sheet surrounded by swirling airstreams AIAA journal, 38 3, 453-460Sakman A.;Jog M.;Jeng S.;Benjamin M. 01-01-2000. Parametric study of simplex fuel nozzle internal flow and performance AIAA journal, 38 7, 1214-1218Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1999. An advanced sub-model for airblast atomizer 35th Joint Propulsion Conference and Exhibit, , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1999. A comprehensive model to predict simplex atomizer performance Journal of Engineering for Gas Turbines and Power, 121 2, 285-294Sadasivam R.;Manglik R.M.;Jog M.A. 01-01-1999. Fully developed forced convection through trapezoidal and hexagonal ducts International Journal of Heat and Mass Transfer, 42 23, 4321-4331Hader M.;Jog M. 01-01-1998. Effect of drop deformation on heat transfer to a drop suspended in an electrical field Journal of Heat Transfer, 120 3, 682-689Hader M.;Jog M. 01-01-1998. Continuum plasma flow past a sphere Physics of Plasmas, 5 4, 902-909Harms T.;Jog M.;Manglik R. 01-01-1998. Effects of temperature-dependent viscosity variations and boundary conditions on fully developed lam Journal of Heat Transfer, 120 3, 600-605Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1998. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle AIAA Journal, 36 2, 201-207Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1998. Instability of an annular liquid sheet surrounded by swirling air streams 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1998. A comprehensive model to predict simplex atomizer performance Proceedings of the ASME Turbo Expo, 3 , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1998. Comprehensive model to predict simplex atomizer performance American Society of Mechanical Engineers (Paper), GT, Sakman A.T.;Jha S.;Jog M.A.;Jeng S.M.;Benjamin M.A. 01-01-1998. A numerical parametric study of simplex fuel nozzle internal flow and performance 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Holtzclaw D.;Sakman T.;Jeng S.;Jog M.;Benjamin M. 01-01-1997. Investigation of flow in a simplex fuel nozzle 33rd Joint Propulsion Conference and Exhibit, , Jeng S.;Jog M.;Benjamin M. 01-01-1997. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle 35th Aerospace Sciences Meeting and Exhibit, , Jog M.;Hader M. 01-01-1997. Transient heat transfer to a spheroidal liquid drop suspended in an electric field International Journal of Heat and Fluid Flow, 18 4, 411-418Klemick S.;Jog M.;Ayyaswamy P. 01-01-1997. Numerical evaluation of heat clearance properties of a radiatively heated biological tissue by adapt Numerical Heat Transfer; Part A: Applications, 31 5, 451-467Jog M.;Huang L. 01-01-1996. Transient heating and melting of particles plasma spray coating process Journal of Heat Transfer, 118 2, 471-477Jog M.;Cohen I.;Ayyaswamy P. 01-01-1994. Heat transfer in wire bonding process Journal of Electronic Packaging, Transactions of the ASME, 116 1, 44-48Jog M.;Cohen I.;Ayyaswamy P. 01-01-1993. Analysis and simulation of thermal transients and resultant stresses and strains in TAB packaging Journal of Electronic Packaging, Transactions of the ASME, 115 1, 34-38Jog M.;Cohen I.;Ayyaswamy P. 01-01-1992. Electrode heating in a wire-to-plane arc Physics of Fluids B, 4 2, 465-472Stauffer T.R.;Jog M.;Ayyaswamy P. 01-01-1992. The effective thermal conductivity of multi foil insulation as a function of temperature and pressur AIAA 27th Thermophysics Conference, 1992, , Huang L.;Jog M.;Cohen I.;Ayyaswamy P. 01-01-1991. Effect of polarity on heat transfer in the ball formation process Journal of Electronic Packaging, Transactions of the ASME, 113 1, 33-39Jog M.;Cohen I.;Ayyaswamy P. 01-01-1991. Breakdown of a wire-to-plane discharge: Transient effects Physics of Fluids B, 3 12, 3532-3536
Research InterestsMy group conducts fundamental and applied research in fluid mechanics, heat and mass transport at multiple scales and with multiple phases using both computational and experimental techniques. In particular, my research interests are: Liquid Atomization and Spray Systems Interfacial Phenomena and Phase Change Heat Transfer Computational Fluid Mechanics, Heat and Mass Transfer Plasma Heat Transfer Heat Transfer Enhancement
Peer Reviewed Publications Kannan, S., Jog, M. A., and Manglik, R.M., 2024. High Power Density Thermal Energy Storage with Phase Change Material in Enhanced Compact Heat Exchangers ASME Journal of Heat and Mass Transfer, 146 5, 052402Kannan, S., Jog, M. A., and Manglik, R.M., 2023. Experimental Study of Enhanced Heat Transfer in Phase Change Material Based Thermal Energy Storage in Compact Heat Exchangers Proceedings of the Summer Heat Transfer Conference, Paper Number SHTC2023-107111 , Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., 2023. Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations ASME Journal of Heat and Mass Transfer, 145 9, 091003Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., 2023. Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations ASME Journal of Heat and Mass Transfer, 145 9, 091003Rajendran, S., Jog, M. A., and Manglik, R. M. 2023. Predicting Splash of a Drop Impacting a Thin Liquid Film Langmuir, 39 41, 14764-14773Manglik R.;Patel P.;Jog M. 12-17-2012. Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 2, fluid flo Journal of Enhanced Heat Transfer, 19 5, 437-450Patel P.;Manglik R.;Jog M. 12-17-2012. Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 1, fluid flo Journal of Enhanced Heat Transfer, 19 5, 423-436 Lin K.T.; Shi D.; Jog M.A.; Manglik R.M. 12-01-2020. General Correlations for Laminar Flow Friction Loss and Heat Transfer in Plain Rectangular Plate-Fin Journal of Heat Transfer, 142 12, Volk A.;Ghia U.;Jog M. 12-01-2018. How Computational Grid Refinement in Three Dimensions Affects Computational Fluid Dynamics-Discrete Journal of Fluids Engineering, Transactions of the ASME, 140 12, Yan K.;Jog M.;Ning Z. 12-01-2013. Nonlinear spatial instability of an annular swirling viscous liquid sheet Acta Mechanica, 224 12, 3071-3090Abdelaal M.;Jog M. 12-01-2012. Effect of viscosity ratio on the electric-field-driven enhancement of heat/mass transfer to a spheri ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 PARTS A, B, C, D, 673-678Manglik R.;Patel P.;Jog M. 12-01-2012. Enhanced laminar flow convection heat transfer in longitudinally twisted rectangular ducts ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 2 , 95-101Miller E.;Patnaik S.;Jog M. 12-01-2012. Dynamic modeling of vapor compression cycles using a novel lagrangian approach ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 2 , 1023-1032Miller E.;Patnaik S.;Jog M. 12-01-2012. System dynamic modeling of vapor compression cycles ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 1 , 27-35Yan K.;Jog M.;Ning Z. 12-01-2012. Nonlinear instability analysis of an annular swirling viscous liquid sheet ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 PARTS A, B, C, D, 2437-2444Verma U.;Manglik R.M.;Jog M.A. 12-01-2011. Experimental study of effects of interfacial properties on nucleate pool boiling in water ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 10 PARTS A AND B, 779-785Huzayyin O.;Jog M.;Manglik R. 12-01-2010. Low Reynolds number air-flow heat transfer in trapezoidally corrugated perforated plate-fin ducts ASHRAE Transactions, 116 PART 2, 339-346Huzayyin O.;Manglik R.;Jog M.;Asme M. 12-01-2010. Extended results for fully developed laminar forced convection heat transfer in trapezoidal channels Journal of Thermal Science and Engineering Applications, 2 4, Jog M.;Manglik R. 12-01-2010. Experimental investigation of low weber number post-impact drop spreading on solid substrates 2010 14th International Heat Transfer Conference, IHTC 14, 6 , 811-817Manglik R.M.;Jog M.A. 12-01-2009. Molecular-to-large-scale heat transfer with multiphase interfaces: Current status and new directions Journal of Heat Transfer, 131 12, 1-11Gatne K.;Manglik R.;Jog M. 12-01-2007. Molecular-scale reagent transport-induced modification of low weber number droplet impact dynamics 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 1 , 741-747Kasimsetty S.;Subramani A.;Manglik R.;Jog M. 12-01-2007. Theoretical modeling and experimental measurements of single bubble dynamics from a submerged orific 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 3 , 9-17Subramani A.;Kasimsetty S.;Manglik R.;Jog M. 12-01-2007. Computational and experimental characterization of single bubble dynamics in isothermal liquid pools 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, 2 FORA PART B, 1481-1482Ibrahim A.;Jog M. 12-01-2005. Modeling of gas-liquid flow in pressure swirl atomizers American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 261 FED , 427-436Ibrahim A.;Jog M. 12-01-2005. Weakly nonlinear instability of an annular liquid sheet subjected to unequal inner and outer gas str Energy Conversion and Resources 2005, 2005 , 251-257Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. 12-01-2005. Enhancement of heat transfer due to plasma flow in material processing applications American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 376 HTD 2, 889-893Subramanian R.;Jog M. 12-01-2005. Droplet heating in a direct-contact heat exchanger: Effect of electric field American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 376 HTD 1, 589-593 Benjamin M.; Jeng S.; Jog M.; Steinthorsson E.; Xue J. 12-01-2002. Computational model to predict flow in simplex fuel atomizer 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Zhang Q.;Jog M. 12-01-2002. Kinetic theory treatment for heat transfer in plasma spraying American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 372 5, 21-24 Benjamin M.; Jeng S.; Jog M.; Liao Y. 12-01-2001. On the mechanism of pressure-swirl airblast atomization 37th Joint Propulsion Conference and Exhibit, , Samudran S.;Jog M. 12-01-2001. A model to evaluate heat transfer to a particle from thermal plasma American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 369 6, 359-361Liao Y.;Jeng S.;Jog M.;Benjamin M. 12-01-2000. The effect of air swirl profile on the instability of a viscous liquid jet Journal of Fluid Mechanics, 424 , 1-20Wasekar V.;Manglik R.;Jog M. 12-01-2000. Numerical investigation of marangoni convection around a vapor bubble in aqueous surfactant solution American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 366 , 283-291Liao Y.;Jeng S.;Jog M.;Benjamin M. 12-01-1999. Air swirl effect on the instability of a viscous liquid jet Proceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM), , 1 Benjamin M.; Jeng S.; Jog M.; Liao Y. 12-01-1998. Atomization of a liquid jet under swirling air stream SAE Technical Papers, , Jog M.;Alam M. 12-01-1998. Transport Phenomena in Rapid Solidification Processing American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-4 , 255Verma A.;Jog M.A. 12-01-1998. Analysis of heat transfer to a spectrum of particles in plasma spray coating process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-364 4, 287-294Hader M.A.;Verma A.;Jog M.A. 12-01-1997. Numerical investigation of heat transfer to a non-spherical drop suspended in an electric field: Int American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 342 , 59-66Harms T.;Jog M.;Manglik R. 12-01-1997. Numerical predictions of laminar fully developed forced convection in a semi-circular duct with temp American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 348 , 31-38Jog M. 12-01-1995. Analysis of heat transfer to a spherical particle from continuum plasma Journal of Applied Physics, 78 3, 1424-1429Jog M.;Huang L. 12-01-1995. Analysis of particle heating in plasma spray coating process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 317-2 , 503-509Jog M.;Huang L. 12-01-1994. Effect of particle loading on heat transfer in plasma coating process American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 201 , 25-31Jog M.;Ayyaswamy P.;Cohen I. 12-01-1993. Influence of elasto-plastic behavior of epoxy on stresses and strains in tab packaging American Society of Mechanical Engineers, EEP, 4-1 , 83-89Jog M.;Cohen I.;Ayyaswamy P. 12-01-1991. Heat transfer in electric arc welding American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, 51 , 135-142Jog M.;Cohen I.;Ayyaswamy P. 12-01-1991. Analysis and simulation of thermal transients and resultant stresses and strains in tab packaging American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 131 , 137-142Huang L.;Jog M.;Cohen I.;Ayyaswamy P. 12-01-1990. Effect of polarity on heat transfer in the ball formation process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 146 , 1-8 Kannan S.; Kumar N.; Jog M.A.; Manglik R.M. 11-02-2022. Phase-Transition Efficacy and Material Compatibility with Thermal Cycling of Lithium Nitrate Trihydr Industrial and Engineering Chemistry Research, 61 43, 16341-16351Verma A.;Jog M.A. 10-15-1999. Plasma flow over an array of particles International Journal of Heat and Mass Transfer, 43 1, 101-111 Manoharan S.; Manglik R.M.; Jog M.A. 10-01-2021. Wetting and Capillarity Effects on Bubble Formation from Orifice Plates Submerged in Pools of Water Journal of Heat Transfer, 143 10, Mandal A.;Jog M.;Xue J.;Ibrahim A. 10-01-2008. Flow of power-law fluids in simplex atomizers International Journal of Heat and Fluid Flow, 29 5, 1494-1503Ibrahim A.;Jog M. 10-01-2007. Nonlinear breakup model for a liquid sheet emanating from a pressure-swirl atomizer Journal of Engineering for Gas Turbines and Power, 129 4, 945-953Ibrahim A.;Jog M. 10-01-2006. Effect of liquid and air swirl strength and relative rotational direction on the instability of an a Acta Mechanica, 186 1-4, 113-133Reddy G.;Kandell B.;Jog M.;Sekhar J. 10-01-2006. Low ionization plasma sources for enhanced aluminum processing for energy savings, environmental ben Industrial Heating, 73 10, 49-52Subramanian R.;Jog M. 10-01-2005. Enhancement of heat transfer by an electric field for a drop translating at intermediate Reynolds nu Journal of Heat Transfer, 127 10, 1087-1095Wen Y.;Jog M. 10-01-2005. Variable property, steady, axi-symmetric, laminar, continuum plasma flow over spheroidal particles International Journal of Heat and Fluid Flow, 26 5, 780-791Jeddy F.;Jog M.;Sekhar J.;Markle R.;Sarvepalli V.;Burada R. 10-01-1999. Convective heating below 1000°C Advanced Materials and Processes, 156 4, 213-215Kasimsetty S.;Manglik R.;Jog M. 09-21-2009. Computational modeling of dynamics of single bubbles emanating from capillary-tube orifice in an iso ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART C, 1933-1940Venkata P.;Jog M.;Manglik R. 09-15-2009. Computational modeling of planar SOFC: Effects of volatile species/oxidant mass flow rate and electr ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART A, Chen H.; Jog M.A.; Evans D.E.; Turkevich L.A. 09-01-2021. Numerical investigation of powder aerosolization in a rotating drum apparatus Powder Technology, 390 , 62-72Jog M.;Ayyaswamy P.;Cohen I. 09-01-1996. Effect of elasto-plastic behavior of epoxy on thermal stresses in TAB packaging International Journal of Microcircuits and Electronic Packaging, 19 3, 308-315Manglik R.;Jog M.;Gande S.;Ravi V. 08-26-2013. Damped harmonic system modeling of post-impact drop-spread dynamics on a hydrophobic surface Physics of Fluids, 25 8, Abdelaal M.;Jog M. 08-14-2013. Heat/mass transport in a drop translating in time-periodic electric fields International Journal of Heat and Mass Transfer, 66 , 284-294Bhagat K.;Reddy G.;Jog M.;Aust R.;Vasudevan V.;Sekhar J. 08-01-2007. A technique to determine the emissivity with the temperature of a Fe-5.8 Pct Al-22 pct Cr alloy Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 38 4, 725-728Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. 08-01-2006. Heat-transfer enhancement using weakly ionized, atmospheric pressure plasma in metallurgical applica Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 37 4, 565-570Fang P.;Manglik R.;Jog M. 07-31-1999. Characteristics of laminar viscous shear-thinning fluid flows in eccentric annular channels Journal of Non-Newtonian Fluid Mechanics, 84 1, 1-17Gatne K.P.;Jog M.A.;Manglik R.M. 07-21-2009. Surfactant-induced modification of low weber number droplet impact dynamics Langmuir, 25 14, 8122-8130Reddy G.S.;Jog M.;Sekhar J.A. 07-17-2008. Innovation with low-lonizationll plasma sources for enhanced aluminum processing Key Engineering Materials, 380 , 209-225 Chen H.; Turkevich L.A.; Jog M.A.; Ghia U. 07-01-2023. Numerical investigation of powder aerosolization in a mining rock dust dispersion chamber Journal of Loss Prevention in the Process Industries, 83 , Ibrahim A.;Jog M. 07-01-2008. Nonlinear instability of an annular liquid sheet exposed to gas flow International Journal of Multiphase Flow, 34 7, 647-664Ibrahim A.;Jog M.;Jeng S. 06-29-2006. Effect of liquid swirl-velocity profile on the instability of a swirling annular liquid sheet Atomization and Sprays, 16 3, 237-263 Rajendran S.; Manglik R.M.; Jog M.A. 06-01-2022. New Property Averaging Scheme for Volume of Fluid Method for Two-Phase Flows with Large Viscosity Ra Journal of Fluids Engineering, Transactions of the ASME, 144 6, Tharakan T.J.;Mukhopadhyay A.;Datta A.;Jog M.A. 06-01-2013. Trends in comprehensive modeling of spray formation International Journal of Spray and Combustion Dynamics, 5 2, 123-180Yerra K.;Manglik R.;Jog M. 06-01-2007. Optimization of heat transfer enhancement in single-phase tubeside flows with twisted-tape inserts International Journal of Heat Exchangers, 8 1, 117-138Rajamohan D.;Banerjee R.;Back L.;Ibrahim A.;Jog M. 06-01-2006. Developing pulsatile flow in a deployed coronary stent Journal of Biomechanical Engineering, 128 3, 347-359 Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 05-01-2022. Role of Three-Dimensional Swirl in Forced Convection Heat Transfer Enhancement in Wavy-Plate-Fin Cha Journal of Heat Transfer, 144 5, Jog M.;Banerjee D. 05-01-2019. Frontiers, Fundamentals, and Future Directions of Transport: From Theory to Applications - A Special Journal of Heat Transfer, 141 5, Manoharan S.;Deodhar A.M.;Manglik R.M.;Jog M.A. 05-01-2019. Computational Modeling of Adiabatic Bubble Growth Dynamics from Submerged Capillary-Tube Orifices in Journal of Heat Transfer, 141 5, Anand S.;Lee J.;Veettil D.;Son S.;Jog M. 04-07-2011. Distribution of vapor inside a cylindrical minichannel with evaporative walls and its effect on drop Journal of Thermal Science and Engineering Applications, 3 1, Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 04-01-2023. Experimental and Computational Study of Enhanced Forced Convection Heat Transfer in Novel Slotted Wa Journal of Heat Transfer, 145 4, Abdelaal M.;Jog M. 04-01-2012. Heat/mass transfer from a drop translating in steady and time-periodic electric fields: External pro International Journal of Heat and Mass Transfer, 55 9-10, 2315-2327Athavale A.;Manglik R.;Jog M. 03-01-2012. An experimental investigation of nucleate pool boiling in aqueous solutions of a polymer AIChE Journal, 58 3, 668-677 Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 02-01-2021. Characterization and Scaling of Forced Convective Swirl in Sinusoidal Wavy-Plate-Fin Cores of Compac Journal of Heat Transfer, 143 2, Jog M.;Ayyaswamy P.;Cohen I. 01-25-1996. Evaporation and combustion of a slowly moving liquid fuel droplet: Higher-order theory Journal of Fluid Mechanics, 307 , 135-165Abdelaal M.;Jog M. 01-15-2012. Steady and time-periodic electric field-driven enhancement of heat or mass transfer to a drop: Inter International Journal of Heat and Mass Transfer, 55 1-3, 251-259 Chen H.; Jog M.A.; Turkevich L.A. 01-01-2023. Computational fluid dynamics simulations of aerosol behavior in a high-speed (Heubach) rotating drum Particuology, 72 , 68-80 Kannan S.; Jog M.A.; Manglik R.M. 01-01-2019. The effects of nucleating agents on phase transition of a salt hydrate phase-change material for the ASME 2019 Heat Transfer Summer Conference, HT 2019, collocated with the ASME 2019 13th International Conference on Energy Sustainability, , Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 01-01-2019. Three-dimensional computations for forced convection of air in offset-strip fin channels: Effects of ASHRAE Transactions, 125 , 172-180Gokhale O.;Jog M.;Manglik R. 01-01-2018. Experimental study of chamber volume effect on bubble formation from orifice plates submerged in wat ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 , Lin K.T.;Jog M.A.;Manglik R.M. 01-01-2018. Computational modeling of single-phase laminar flow heat transfer in complex plate-fin ducts International Heat Transfer Conference, 2018-August , 5381-5388Shi D.;Jog M.A.;Manglik R.M. 01-01-2018. Computational modeling of low Reynolds number air flows in wavy-plate-fin channels: Contribution of International Heat Transfer Conference, 2018-August , 5123-5530Bhave C.;Manglik R.;Jog M. 01-01-2017. Computational study of enhanced convection and effects of geometrical features in offset strip fin c ASME 2017 Heat Transfer Summer Conference, HT 2017, 2 , Jog M. 01-01-2017. Applications: Heat transfer in plasma sprays CRC Handbook of Thermal Engineering, Second Edition, , 1003-1016Manoharan S.;Jog M.;Manglik R. 01-01-2017. Effects of liquid viscosity on bubble growth from submerged orifice plates ASME 2017 Heat Transfer Summer Conference, HT 2017, 2 , Rajendran S.;Jog M.;Manglik R. 01-01-2017. Experimental investigation of jet breakup at low Weber number Atomization and Sprays, 27 9, 821-834Manglik R.;Jog M. 01-01-2016. Resolving the energy-water nexus in large thermoelectric power plants: A case for application of enh Journal of Enhanced Heat Transfer, 23 4, 263-282Manoharan S.;Jog M.;Manglik R. 01-01-2016. Visual observations of chamber volume effect on ebullience from submerged orifice plates American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 1B-2016 , Abdelaal M.;Huzayyin O.;Jog M. 01-01-2015. Heat/Mass transfer to a drop translating in a perpendicular electric field ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7A-2015 , Manoharan S.;Kalaikadal D.;Manglik R.;Jog M.;Iskrenova-Ekiert E.;Patnaik S. 01-01-2015. Visualization of multiscale processes - Bubble dynamics in surface active colloids Journal of Heat Transfer, 137 8, Rajendran S.;Jog M.;Manglik R. 01-01-2015. Numerical analysis of liquid breakup and drop generation in low velocity jets ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3-2015 , Rojatkar P.;Jog M.A.;Jeng S.M. 01-01-2015. Numerical study of flow through 3x3 multiswirler arrays with CO and counter swirler arrangements Proceedings of the ASME Turbo Expo, 4B , Bishara F.;Jog M.;Manglik R. 01-01-2014. Heat transfer enhancement due to swirl effects in oval tubes twisted about their longitudinal axis Journal of Enhanced Heat Transfer, 20 4, 289-304Rojatkar P.;Kao Y.H.;Jog M.A.;Jeng S.M. 01-01-2014. Effect of swirler offset on aerodynamics of multiswirler arrays Proceedings of the ASME Turbo Expo, 4B , Manglik R.;Huzayyin O.;Jog M. 01-01-2011. Fin effects in flow channels of plate-fin compact heat exchanger cores Journal of Thermal Science and Engineering Applications, 3 4, Bishara F.;Jog M.;Manglik R. 01-01-2010. Heat transfer and pressure drop of periodically fully developed swirling laminar flows in twisted tu ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART B, 1131-1137Huzayyin O.;Jog M.;Manglik R. 01-01-2010. Computational modeling of convective heat transfer in converging-diverging plate channels with fin-w ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART B, 1173-1181Vyas S.;Manglik R.;Jog M. 01-01-2010. Visualization and characterization of a lateral swirl flow structure in sinusoidal corrugated-plate Journal of Flow Visualization and Image Processing, 17 4, 281-296Bishara F.;Jog M.;Manglik R. 01-01-2009. Computational simulation of swirl enhanced flow and heat transfer in a twisted oval tube Journal of Heat Transfer, 131 8, 1Jog M.;Manglik R. 01-01-2009. Recent research in molecular-to-large-scale heat transfer with multiphase interfaces and their appli Journal of Heat Transfer, 131 12, 1Sanjeev A.;Huzayyin O.;Gatne K.;Manglik R.;Jog M. 01-01-2008. Short time impact and cooling of water droplets impinging on hydrophobic and hydrophilic surfaces Journal of Heat Transfer, 130 8, 1Subramani A.;Jog M.;Manglik R. 01-01-2008. Air-water ebullience systems: Visualizing single bubble to wave instability signatures Journal of Heat Transfer, 130 8, 1Gatne K.;Manglik R.;Jog M. 01-01-2007. Visualization of fracture dynamics of droplet recoil on hydrophobic surface Journal of Heat Transfer, 129 8, 931Subramani A.;Jog M.;Manglik R. 01-01-2007. Experimental study of single-bubble dynamics in isothermal liquid pools: Effects of fluid properties ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8 , 1639-1645Gatne K.;Jog M.;Manglik R. 01-01-2006. Experimental investigation of droplet impact dynamics on solid surfaces: Spreading and recoil effect American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , Ibrahim A.;Jog M. 01-01-2006. Breakup model for annular liquid sheets American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, , Ibrahim A.;Jog M. 01-01-2006. Nonlinear breakup of a coaxial liquid jet in a swirling gas stream Physics of Fluids, 18 11, Manglik R.;Jog M.;Liu Y. 01-01-2006. Linkage between learning styles and design engineering perceptions of undergraduate students Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education, , Manglik R.;Jog M.;Liu Y. 01-01-2006. Linkage between learning styles and design engineering perceptions of undergraduate students American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , Manglik R.;Jog M.;Subramani A.;Gatne K. 01-01-2006. Mili-Scale visualization of bubble growth-translation and droplet impact dynamics Journal of Heat Transfer, 128 8, 736Rajamohan D.;Ibrahim A.A.;Back L.H.;Jog M.A.;Banerjee R.K. 01-01-2004. Evaluation of modified oscillatory shear index and recirculation zone in a deployed coronary stent Advances in Bioengineering, BED, , 35-36Xue J.;Jog M.;Jeng S.;Steinthorsson E.;Benjamin M. 01-01-2004. Effect of geometric parameters on simplex atomizer performance AIAA Journal, 42 12, 2408-2415Holcomb M.;Slusher S.;Rajamohan D.;Back L.;Jog M.;Banerjee R. 01-01-2003. Basal to near hyperemic pulsatile flow in a deployed coronary stent American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, 55 , 81-82Wen Y.;Jog M. 01-01-2003. Effect of temperature dependent properties and particle shape on heat transfer in plasma flow American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 374 3, 217-220Zhang Q.;Jog M. 01-01-2002. Kinetic theory treatment for heat transfer in plasma spraying ASME International Mechanical Engineering Congress and Exposition, Proceedings, 5 , 21-24Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-2001. Advanced sub-model for airblast atomizers Journal of Propulsion and Power, 17 2, 411-417Liao Y.;Jeng S.;Jog M.;Benjamin M. 01-01-2000. Instability of an annular liquid sheet surrounded by swirling airstreams AIAA journal, 38 3, 453-460Sakman A.;Jog M.;Jeng S.;Benjamin M. 01-01-2000. Parametric study of simplex fuel nozzle internal flow and performance AIAA journal, 38 7, 1214-1218Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1999. An advanced sub-model for airblast atomizer 35th Joint Propulsion Conference and Exhibit, , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1999. A comprehensive model to predict simplex atomizer performance Journal of Engineering for Gas Turbines and Power, 121 2, 285-294Sadasivam R.;Manglik R.M.;Jog M.A. 01-01-1999. Fully developed forced convection through trapezoidal and hexagonal ducts International Journal of Heat and Mass Transfer, 42 23, 4321-4331Hader M.;Jog M. 01-01-1998. Effect of drop deformation on heat transfer to a drop suspended in an electrical field Journal of Heat Transfer, 120 3, 682-689Hader M.;Jog M. 01-01-1998. Continuum plasma flow past a sphere Physics of Plasmas, 5 4, 902-909Harms T.;Jog M.;Manglik R. 01-01-1998. Effects of temperature-dependent viscosity variations and boundary conditions on fully developed lam Journal of Heat Transfer, 120 3, 600-605Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1998. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle AIAA Journal, 36 2, 201-207Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1998. Instability of an annular liquid sheet surrounded by swirling air streams 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1998. A comprehensive model to predict simplex atomizer performance Proceedings of the ASME Turbo Expo, 3 , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1998. Comprehensive model to predict simplex atomizer performance American Society of Mechanical Engineers (Paper), GT, Sakman A.T.;Jha S.;Jog M.A.;Jeng S.M.;Benjamin M.A. 01-01-1998. A numerical parametric study of simplex fuel nozzle internal flow and performance 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Holtzclaw D.;Sakman T.;Jeng S.;Jog M.;Benjamin M. 01-01-1997. Investigation of flow in a simplex fuel nozzle 33rd Joint Propulsion Conference and Exhibit, , Jeng S.;Jog M.;Benjamin M. 01-01-1997. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle 35th Aerospace Sciences Meeting and Exhibit, , Jog M.;Hader M. 01-01-1997. Transient heat transfer to a spheroidal liquid drop suspended in an electric field International Journal of Heat and Fluid Flow, 18 4, 411-418Klemick S.;Jog M.;Ayyaswamy P. 01-01-1997. Numerical evaluation of heat clearance properties of a radiatively heated biological tissue by adapt Numerical Heat Transfer; Part A: Applications, 31 5, 451-467Jog M.;Huang L. 01-01-1996. Transient heating and melting of particles plasma spray coating process Journal of Heat Transfer, 118 2, 471-477Jog M.;Cohen I.;Ayyaswamy P. 01-01-1994. Heat transfer in wire bonding process Journal of Electronic Packaging, Transactions of the ASME, 116 1, 44-48Jog M.;Cohen I.;Ayyaswamy P. 01-01-1993. Analysis and simulation of thermal transients and resultant stresses and strains in TAB packaging Journal of Electronic Packaging, Transactions of the ASME, 115 1, 34-38Jog M.;Cohen I.;Ayyaswamy P. 01-01-1992. Electrode heating in a wire-to-plane arc Physics of Fluids B, 4 2, 465-472Stauffer T.R.;Jog M.;Ayyaswamy P. 01-01-1992. The effective thermal conductivity of multi foil insulation as a function of temperature and pressur AIAA 27th Thermophysics Conference, 1992, , Huang L.;Jog M.;Cohen I.;Ayyaswamy P. 01-01-1991. Effect of polarity on heat transfer in the ball formation process Journal of Electronic Packaging, Transactions of the ASME, 113 1, 33-39Jog M.;Cohen I.;Ayyaswamy P. 01-01-1991. Breakdown of a wire-to-plane discharge: Transient effects Physics of Fluids B, 3 12, 3532-3536
Kannan, S., Jog, M. A., and Manglik, R.M., 2024. High Power Density Thermal Energy Storage with Phase Change Material in Enhanced Compact Heat Exchangers ASME Journal of Heat and Mass Transfer, 146 5, 052402Kannan, S., Jog, M. A., and Manglik, R.M., 2023. Experimental Study of Enhanced Heat Transfer in Phase Change Material Based Thermal Energy Storage in Compact Heat Exchangers Proceedings of the Summer Heat Transfer Conference, Paper Number SHTC2023-107111 , Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., 2023. Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations ASME Journal of Heat and Mass Transfer, 145 9, 091003Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., 2023. Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations ASME Journal of Heat and Mass Transfer, 145 9, 091003Rajendran, S., Jog, M. A., and Manglik, R. M. 2023. Predicting Splash of a Drop Impacting a Thin Liquid Film Langmuir, 39 41, 14764-14773Manglik R.;Patel P.;Jog M. 12-17-2012. Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 2, fluid flo Journal of Enhanced Heat Transfer, 19 5, 437-450Patel P.;Manglik R.;Jog M. 12-17-2012. Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 1, fluid flo Journal of Enhanced Heat Transfer, 19 5, 423-436 Lin K.T.; Shi D.; Jog M.A.; Manglik R.M. 12-01-2020. General Correlations for Laminar Flow Friction Loss and Heat Transfer in Plain Rectangular Plate-Fin Journal of Heat Transfer, 142 12, Volk A.;Ghia U.;Jog M. 12-01-2018. How Computational Grid Refinement in Three Dimensions Affects Computational Fluid Dynamics-Discrete Journal of Fluids Engineering, Transactions of the ASME, 140 12, Yan K.;Jog M.;Ning Z. 12-01-2013. Nonlinear spatial instability of an annular swirling viscous liquid sheet Acta Mechanica, 224 12, 3071-3090Abdelaal M.;Jog M. 12-01-2012. Effect of viscosity ratio on the electric-field-driven enhancement of heat/mass transfer to a spheri ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 PARTS A, B, C, D, 673-678Manglik R.;Patel P.;Jog M. 12-01-2012. Enhanced laminar flow convection heat transfer in longitudinally twisted rectangular ducts ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 2 , 95-101Miller E.;Patnaik S.;Jog M. 12-01-2012. Dynamic modeling of vapor compression cycles using a novel lagrangian approach ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 2 , 1023-1032Miller E.;Patnaik S.;Jog M. 12-01-2012. System dynamic modeling of vapor compression cycles ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 1 , 27-35Yan K.;Jog M.;Ning Z. 12-01-2012. Nonlinear instability analysis of an annular swirling viscous liquid sheet ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 PARTS A, B, C, D, 2437-2444Verma U.;Manglik R.M.;Jog M.A. 12-01-2011. Experimental study of effects of interfacial properties on nucleate pool boiling in water ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 10 PARTS A AND B, 779-785Huzayyin O.;Jog M.;Manglik R. 12-01-2010. Low Reynolds number air-flow heat transfer in trapezoidally corrugated perforated plate-fin ducts ASHRAE Transactions, 116 PART 2, 339-346Huzayyin O.;Manglik R.;Jog M.;Asme M. 12-01-2010. Extended results for fully developed laminar forced convection heat transfer in trapezoidal channels Journal of Thermal Science and Engineering Applications, 2 4, Jog M.;Manglik R. 12-01-2010. Experimental investigation of low weber number post-impact drop spreading on solid substrates 2010 14th International Heat Transfer Conference, IHTC 14, 6 , 811-817Manglik R.M.;Jog M.A. 12-01-2009. Molecular-to-large-scale heat transfer with multiphase interfaces: Current status and new directions Journal of Heat Transfer, 131 12, 1-11Gatne K.;Manglik R.;Jog M. 12-01-2007. Molecular-scale reagent transport-induced modification of low weber number droplet impact dynamics 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 1 , 741-747Kasimsetty S.;Subramani A.;Manglik R.;Jog M. 12-01-2007. Theoretical modeling and experimental measurements of single bubble dynamics from a submerged orific 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 3 , 9-17Subramani A.;Kasimsetty S.;Manglik R.;Jog M. 12-01-2007. Computational and experimental characterization of single bubble dynamics in isothermal liquid pools 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, 2 FORA PART B, 1481-1482Ibrahim A.;Jog M. 12-01-2005. Modeling of gas-liquid flow in pressure swirl atomizers American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 261 FED , 427-436Ibrahim A.;Jog M. 12-01-2005. Weakly nonlinear instability of an annular liquid sheet subjected to unequal inner and outer gas str Energy Conversion and Resources 2005, 2005 , 251-257Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. 12-01-2005. Enhancement of heat transfer due to plasma flow in material processing applications American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 376 HTD 2, 889-893Subramanian R.;Jog M. 12-01-2005. Droplet heating in a direct-contact heat exchanger: Effect of electric field American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 376 HTD 1, 589-593 Benjamin M.; Jeng S.; Jog M.; Steinthorsson E.; Xue J. 12-01-2002. Computational model to predict flow in simplex fuel atomizer 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Zhang Q.;Jog M. 12-01-2002. Kinetic theory treatment for heat transfer in plasma spraying American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 372 5, 21-24 Benjamin M.; Jeng S.; Jog M.; Liao Y. 12-01-2001. On the mechanism of pressure-swirl airblast atomization 37th Joint Propulsion Conference and Exhibit, , Samudran S.;Jog M. 12-01-2001. A model to evaluate heat transfer to a particle from thermal plasma American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 369 6, 359-361Liao Y.;Jeng S.;Jog M.;Benjamin M. 12-01-2000. The effect of air swirl profile on the instability of a viscous liquid jet Journal of Fluid Mechanics, 424 , 1-20Wasekar V.;Manglik R.;Jog M. 12-01-2000. Numerical investigation of marangoni convection around a vapor bubble in aqueous surfactant solution American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 366 , 283-291Liao Y.;Jeng S.;Jog M.;Benjamin M. 12-01-1999. Air swirl effect on the instability of a viscous liquid jet Proceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM), , 1 Benjamin M.; Jeng S.; Jog M.; Liao Y. 12-01-1998. Atomization of a liquid jet under swirling air stream SAE Technical Papers, , Jog M.;Alam M. 12-01-1998. Transport Phenomena in Rapid Solidification Processing American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-4 , 255Verma A.;Jog M.A. 12-01-1998. Analysis of heat transfer to a spectrum of particles in plasma spray coating process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-364 4, 287-294Hader M.A.;Verma A.;Jog M.A. 12-01-1997. Numerical investigation of heat transfer to a non-spherical drop suspended in an electric field: Int American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 342 , 59-66Harms T.;Jog M.;Manglik R. 12-01-1997. Numerical predictions of laminar fully developed forced convection in a semi-circular duct with temp American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 348 , 31-38Jog M. 12-01-1995. Analysis of heat transfer to a spherical particle from continuum plasma Journal of Applied Physics, 78 3, 1424-1429Jog M.;Huang L. 12-01-1995. Analysis of particle heating in plasma spray coating process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 317-2 , 503-509Jog M.;Huang L. 12-01-1994. Effect of particle loading on heat transfer in plasma coating process American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 201 , 25-31Jog M.;Ayyaswamy P.;Cohen I. 12-01-1993. Influence of elasto-plastic behavior of epoxy on stresses and strains in tab packaging American Society of Mechanical Engineers, EEP, 4-1 , 83-89Jog M.;Cohen I.;Ayyaswamy P. 12-01-1991. Heat transfer in electric arc welding American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, 51 , 135-142Jog M.;Cohen I.;Ayyaswamy P. 12-01-1991. Analysis and simulation of thermal transients and resultant stresses and strains in tab packaging American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 131 , 137-142Huang L.;Jog M.;Cohen I.;Ayyaswamy P. 12-01-1990. Effect of polarity on heat transfer in the ball formation process American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 146 , 1-8 Kannan S.; Kumar N.; Jog M.A.; Manglik R.M. 11-02-2022. Phase-Transition Efficacy and Material Compatibility with Thermal Cycling of Lithium Nitrate Trihydr Industrial and Engineering Chemistry Research, 61 43, 16341-16351Verma A.;Jog M.A. 10-15-1999. Plasma flow over an array of particles International Journal of Heat and Mass Transfer, 43 1, 101-111 Manoharan S.; Manglik R.M.; Jog M.A. 10-01-2021. Wetting and Capillarity Effects on Bubble Formation from Orifice Plates Submerged in Pools of Water Journal of Heat Transfer, 143 10, Mandal A.;Jog M.;Xue J.;Ibrahim A. 10-01-2008. Flow of power-law fluids in simplex atomizers International Journal of Heat and Fluid Flow, 29 5, 1494-1503Ibrahim A.;Jog M. 10-01-2007. Nonlinear breakup model for a liquid sheet emanating from a pressure-swirl atomizer Journal of Engineering for Gas Turbines and Power, 129 4, 945-953Ibrahim A.;Jog M. 10-01-2006. Effect of liquid and air swirl strength and relative rotational direction on the instability of an a Acta Mechanica, 186 1-4, 113-133Reddy G.;Kandell B.;Jog M.;Sekhar J. 10-01-2006. Low ionization plasma sources for enhanced aluminum processing for energy savings, environmental ben Industrial Heating, 73 10, 49-52Subramanian R.;Jog M. 10-01-2005. Enhancement of heat transfer by an electric field for a drop translating at intermediate Reynolds nu Journal of Heat Transfer, 127 10, 1087-1095Wen Y.;Jog M. 10-01-2005. Variable property, steady, axi-symmetric, laminar, continuum plasma flow over spheroidal particles International Journal of Heat and Fluid Flow, 26 5, 780-791Jeddy F.;Jog M.;Sekhar J.;Markle R.;Sarvepalli V.;Burada R. 10-01-1999. Convective heating below 1000°C Advanced Materials and Processes, 156 4, 213-215Kasimsetty S.;Manglik R.;Jog M. 09-21-2009. Computational modeling of dynamics of single bubbles emanating from capillary-tube orifice in an iso ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART C, 1933-1940Venkata P.;Jog M.;Manglik R. 09-15-2009. Computational modeling of planar SOFC: Effects of volatile species/oxidant mass flow rate and electr ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART A, Chen H.; Jog M.A.; Evans D.E.; Turkevich L.A. 09-01-2021. Numerical investigation of powder aerosolization in a rotating drum apparatus Powder Technology, 390 , 62-72Jog M.;Ayyaswamy P.;Cohen I. 09-01-1996. Effect of elasto-plastic behavior of epoxy on thermal stresses in TAB packaging International Journal of Microcircuits and Electronic Packaging, 19 3, 308-315Manglik R.;Jog M.;Gande S.;Ravi V. 08-26-2013. Damped harmonic system modeling of post-impact drop-spread dynamics on a hydrophobic surface Physics of Fluids, 25 8, Abdelaal M.;Jog M. 08-14-2013. Heat/mass transport in a drop translating in time-periodic electric fields International Journal of Heat and Mass Transfer, 66 , 284-294Bhagat K.;Reddy G.;Jog M.;Aust R.;Vasudevan V.;Sekhar J. 08-01-2007. A technique to determine the emissivity with the temperature of a Fe-5.8 Pct Al-22 pct Cr alloy Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 38 4, 725-728Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. 08-01-2006. Heat-transfer enhancement using weakly ionized, atmospheric pressure plasma in metallurgical applica Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 37 4, 565-570Fang P.;Manglik R.;Jog M. 07-31-1999. Characteristics of laminar viscous shear-thinning fluid flows in eccentric annular channels Journal of Non-Newtonian Fluid Mechanics, 84 1, 1-17Gatne K.P.;Jog M.A.;Manglik R.M. 07-21-2009. Surfactant-induced modification of low weber number droplet impact dynamics Langmuir, 25 14, 8122-8130Reddy G.S.;Jog M.;Sekhar J.A. 07-17-2008. Innovation with low-lonizationll plasma sources for enhanced aluminum processing Key Engineering Materials, 380 , 209-225 Chen H.; Turkevich L.A.; Jog M.A.; Ghia U. 07-01-2023. Numerical investigation of powder aerosolization in a mining rock dust dispersion chamber Journal of Loss Prevention in the Process Industries, 83 , Ibrahim A.;Jog M. 07-01-2008. Nonlinear instability of an annular liquid sheet exposed to gas flow International Journal of Multiphase Flow, 34 7, 647-664Ibrahim A.;Jog M.;Jeng S. 06-29-2006. Effect of liquid swirl-velocity profile on the instability of a swirling annular liquid sheet Atomization and Sprays, 16 3, 237-263 Rajendran S.; Manglik R.M.; Jog M.A. 06-01-2022. New Property Averaging Scheme for Volume of Fluid Method for Two-Phase Flows with Large Viscosity Ra Journal of Fluids Engineering, Transactions of the ASME, 144 6, Tharakan T.J.;Mukhopadhyay A.;Datta A.;Jog M.A. 06-01-2013. Trends in comprehensive modeling of spray formation International Journal of Spray and Combustion Dynamics, 5 2, 123-180Yerra K.;Manglik R.;Jog M. 06-01-2007. Optimization of heat transfer enhancement in single-phase tubeside flows with twisted-tape inserts International Journal of Heat Exchangers, 8 1, 117-138Rajamohan D.;Banerjee R.;Back L.;Ibrahim A.;Jog M. 06-01-2006. Developing pulsatile flow in a deployed coronary stent Journal of Biomechanical Engineering, 128 3, 347-359 Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 05-01-2022. Role of Three-Dimensional Swirl in Forced Convection Heat Transfer Enhancement in Wavy-Plate-Fin Cha Journal of Heat Transfer, 144 5, Jog M.;Banerjee D. 05-01-2019. Frontiers, Fundamentals, and Future Directions of Transport: From Theory to Applications - A Special Journal of Heat Transfer, 141 5, Manoharan S.;Deodhar A.M.;Manglik R.M.;Jog M.A. 05-01-2019. Computational Modeling of Adiabatic Bubble Growth Dynamics from Submerged Capillary-Tube Orifices in Journal of Heat Transfer, 141 5, Anand S.;Lee J.;Veettil D.;Son S.;Jog M. 04-07-2011. Distribution of vapor inside a cylindrical minichannel with evaporative walls and its effect on drop Journal of Thermal Science and Engineering Applications, 3 1, Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 04-01-2023. Experimental and Computational Study of Enhanced Forced Convection Heat Transfer in Novel Slotted Wa Journal of Heat Transfer, 145 4, Abdelaal M.;Jog M. 04-01-2012. Heat/mass transfer from a drop translating in steady and time-periodic electric fields: External pro International Journal of Heat and Mass Transfer, 55 9-10, 2315-2327Athavale A.;Manglik R.;Jog M. 03-01-2012. An experimental investigation of nucleate pool boiling in aqueous solutions of a polymer AIChE Journal, 58 3, 668-677 Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 02-01-2021. Characterization and Scaling of Forced Convective Swirl in Sinusoidal Wavy-Plate-Fin Cores of Compac Journal of Heat Transfer, 143 2, Jog M.;Ayyaswamy P.;Cohen I. 01-25-1996. Evaporation and combustion of a slowly moving liquid fuel droplet: Higher-order theory Journal of Fluid Mechanics, 307 , 135-165Abdelaal M.;Jog M. 01-15-2012. Steady and time-periodic electric field-driven enhancement of heat or mass transfer to a drop: Inter International Journal of Heat and Mass Transfer, 55 1-3, 251-259 Chen H.; Jog M.A.; Turkevich L.A. 01-01-2023. Computational fluid dynamics simulations of aerosol behavior in a high-speed (Heubach) rotating drum Particuology, 72 , 68-80 Kannan S.; Jog M.A.; Manglik R.M. 01-01-2019. The effects of nucleating agents on phase transition of a salt hydrate phase-change material for the ASME 2019 Heat Transfer Summer Conference, HT 2019, collocated with the ASME 2019 13th International Conference on Energy Sustainability, , Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. 01-01-2019. Three-dimensional computations for forced convection of air in offset-strip fin channels: Effects of ASHRAE Transactions, 125 , 172-180Gokhale O.;Jog M.;Manglik R. 01-01-2018. Experimental study of chamber volume effect on bubble formation from orifice plates submerged in wat ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7 , Lin K.T.;Jog M.A.;Manglik R.M. 01-01-2018. Computational modeling of single-phase laminar flow heat transfer in complex plate-fin ducts International Heat Transfer Conference, 2018-August , 5381-5388Shi D.;Jog M.A.;Manglik R.M. 01-01-2018. Computational modeling of low Reynolds number air flows in wavy-plate-fin channels: Contribution of International Heat Transfer Conference, 2018-August , 5123-5530Bhave C.;Manglik R.;Jog M. 01-01-2017. Computational study of enhanced convection and effects of geometrical features in offset strip fin c ASME 2017 Heat Transfer Summer Conference, HT 2017, 2 , Jog M. 01-01-2017. Applications: Heat transfer in plasma sprays CRC Handbook of Thermal Engineering, Second Edition, , 1003-1016Manoharan S.;Jog M.;Manglik R. 01-01-2017. Effects of liquid viscosity on bubble growth from submerged orifice plates ASME 2017 Heat Transfer Summer Conference, HT 2017, 2 , Rajendran S.;Jog M.;Manglik R. 01-01-2017. Experimental investigation of jet breakup at low Weber number Atomization and Sprays, 27 9, 821-834Manglik R.;Jog M. 01-01-2016. Resolving the energy-water nexus in large thermoelectric power plants: A case for application of enh Journal of Enhanced Heat Transfer, 23 4, 263-282Manoharan S.;Jog M.;Manglik R. 01-01-2016. Visual observations of chamber volume effect on ebullience from submerged orifice plates American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 1B-2016 , Abdelaal M.;Huzayyin O.;Jog M. 01-01-2015. Heat/Mass transfer to a drop translating in a perpendicular electric field ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7A-2015 , Manoharan S.;Kalaikadal D.;Manglik R.;Jog M.;Iskrenova-Ekiert E.;Patnaik S. 01-01-2015. Visualization of multiscale processes - Bubble dynamics in surface active colloids Journal of Heat Transfer, 137 8, Rajendran S.;Jog M.;Manglik R. 01-01-2015. Numerical analysis of liquid breakup and drop generation in low velocity jets ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3-2015 , Rojatkar P.;Jog M.A.;Jeng S.M. 01-01-2015. Numerical study of flow through 3x3 multiswirler arrays with CO and counter swirler arrangements Proceedings of the ASME Turbo Expo, 4B , Bishara F.;Jog M.;Manglik R. 01-01-2014. Heat transfer enhancement due to swirl effects in oval tubes twisted about their longitudinal axis Journal of Enhanced Heat Transfer, 20 4, 289-304Rojatkar P.;Kao Y.H.;Jog M.A.;Jeng S.M. 01-01-2014. Effect of swirler offset on aerodynamics of multiswirler arrays Proceedings of the ASME Turbo Expo, 4B , Manglik R.;Huzayyin O.;Jog M. 01-01-2011. Fin effects in flow channels of plate-fin compact heat exchanger cores Journal of Thermal Science and Engineering Applications, 3 4, Bishara F.;Jog M.;Manglik R. 01-01-2010. Heat transfer and pressure drop of periodically fully developed swirling laminar flows in twisted tu ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART B, 1131-1137Huzayyin O.;Jog M.;Manglik R. 01-01-2010. Computational modeling of convective heat transfer in converging-diverging plate channels with fin-w ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART B, 1173-1181Vyas S.;Manglik R.;Jog M. 01-01-2010. Visualization and characterization of a lateral swirl flow structure in sinusoidal corrugated-plate Journal of Flow Visualization and Image Processing, 17 4, 281-296Bishara F.;Jog M.;Manglik R. 01-01-2009. Computational simulation of swirl enhanced flow and heat transfer in a twisted oval tube Journal of Heat Transfer, 131 8, 1Jog M.;Manglik R. 01-01-2009. Recent research in molecular-to-large-scale heat transfer with multiphase interfaces and their appli Journal of Heat Transfer, 131 12, 1Sanjeev A.;Huzayyin O.;Gatne K.;Manglik R.;Jog M. 01-01-2008. Short time impact and cooling of water droplets impinging on hydrophobic and hydrophilic surfaces Journal of Heat Transfer, 130 8, 1Subramani A.;Jog M.;Manglik R. 01-01-2008. Air-water ebullience systems: Visualizing single bubble to wave instability signatures Journal of Heat Transfer, 130 8, 1Gatne K.;Manglik R.;Jog M. 01-01-2007. Visualization of fracture dynamics of droplet recoil on hydrophobic surface Journal of Heat Transfer, 129 8, 931Subramani A.;Jog M.;Manglik R. 01-01-2007. Experimental study of single-bubble dynamics in isothermal liquid pools: Effects of fluid properties ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8 , 1639-1645Gatne K.;Jog M.;Manglik R. 01-01-2006. Experimental investigation of droplet impact dynamics on solid surfaces: Spreading and recoil effect American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , Ibrahim A.;Jog M. 01-01-2006. Breakup model for annular liquid sheets American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, , Ibrahim A.;Jog M. 01-01-2006. Nonlinear breakup of a coaxial liquid jet in a swirling gas stream Physics of Fluids, 18 11, Manglik R.;Jog M.;Liu Y. 01-01-2006. Linkage between learning styles and design engineering perceptions of undergraduate students Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education, , Manglik R.;Jog M.;Liu Y. 01-01-2006. Linkage between learning styles and design engineering perceptions of undergraduate students American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , Manglik R.;Jog M.;Subramani A.;Gatne K. 01-01-2006. Mili-Scale visualization of bubble growth-translation and droplet impact dynamics Journal of Heat Transfer, 128 8, 736Rajamohan D.;Ibrahim A.A.;Back L.H.;Jog M.A.;Banerjee R.K. 01-01-2004. Evaluation of modified oscillatory shear index and recirculation zone in a deployed coronary stent Advances in Bioengineering, BED, , 35-36Xue J.;Jog M.;Jeng S.;Steinthorsson E.;Benjamin M. 01-01-2004. Effect of geometric parameters on simplex atomizer performance AIAA Journal, 42 12, 2408-2415Holcomb M.;Slusher S.;Rajamohan D.;Back L.;Jog M.;Banerjee R. 01-01-2003. Basal to near hyperemic pulsatile flow in a deployed coronary stent American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, 55 , 81-82Wen Y.;Jog M. 01-01-2003. Effect of temperature dependent properties and particle shape on heat transfer in plasma flow American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 374 3, 217-220Zhang Q.;Jog M. 01-01-2002. Kinetic theory treatment for heat transfer in plasma spraying ASME International Mechanical Engineering Congress and Exposition, Proceedings, 5 , 21-24Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-2001. Advanced sub-model for airblast atomizers Journal of Propulsion and Power, 17 2, 411-417Liao Y.;Jeng S.;Jog M.;Benjamin M. 01-01-2000. Instability of an annular liquid sheet surrounded by swirling airstreams AIAA journal, 38 3, 453-460Sakman A.;Jog M.;Jeng S.;Benjamin M. 01-01-2000. Parametric study of simplex fuel nozzle internal flow and performance AIAA journal, 38 7, 1214-1218Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1999. An advanced sub-model for airblast atomizer 35th Joint Propulsion Conference and Exhibit, , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1999. A comprehensive model to predict simplex atomizer performance Journal of Engineering for Gas Turbines and Power, 121 2, 285-294Sadasivam R.;Manglik R.M.;Jog M.A. 01-01-1999. Fully developed forced convection through trapezoidal and hexagonal ducts International Journal of Heat and Mass Transfer, 42 23, 4321-4331Hader M.;Jog M. 01-01-1998. Effect of drop deformation on heat transfer to a drop suspended in an electrical field Journal of Heat Transfer, 120 3, 682-689Hader M.;Jog M. 01-01-1998. Continuum plasma flow past a sphere Physics of Plasmas, 5 4, 902-909Harms T.;Jog M.;Manglik R. 01-01-1998. Effects of temperature-dependent viscosity variations and boundary conditions on fully developed lam Journal of Heat Transfer, 120 3, 600-605Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1998. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle AIAA Journal, 36 2, 201-207Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. 01-01-1998. Instability of an annular liquid sheet surrounded by swirling air streams 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1998. A comprehensive model to predict simplex atomizer performance Proceedings of the ASME Turbo Expo, 3 , Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. 01-01-1998. Comprehensive model to predict simplex atomizer performance American Society of Mechanical Engineers (Paper), GT, Sakman A.T.;Jha S.;Jog M.A.;Jeng S.M.;Benjamin M.A. 01-01-1998. A numerical parametric study of simplex fuel nozzle internal flow and performance 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, , Holtzclaw D.;Sakman T.;Jeng S.;Jog M.;Benjamin M. 01-01-1997. Investigation of flow in a simplex fuel nozzle 33rd Joint Propulsion Conference and Exhibit, , Jeng S.;Jog M.;Benjamin M. 01-01-1997. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle 35th Aerospace Sciences Meeting and Exhibit, , Jog M.;Hader M. 01-01-1997. Transient heat transfer to a spheroidal liquid drop suspended in an electric field International Journal of Heat and Fluid Flow, 18 4, 411-418Klemick S.;Jog M.;Ayyaswamy P. 01-01-1997. Numerical evaluation of heat clearance properties of a radiatively heated biological tissue by adapt Numerical Heat Transfer; Part A: Applications, 31 5, 451-467Jog M.;Huang L. 01-01-1996. Transient heating and melting of particles plasma spray coating process Journal of Heat Transfer, 118 2, 471-477Jog M.;Cohen I.;Ayyaswamy P. 01-01-1994. Heat transfer in wire bonding process Journal of Electronic Packaging, Transactions of the ASME, 116 1, 44-48Jog M.;Cohen I.;Ayyaswamy P. 01-01-1993. Analysis and simulation of thermal transients and resultant stresses and strains in TAB packaging Journal of Electronic Packaging, Transactions of the ASME, 115 1, 34-38Jog M.;Cohen I.;Ayyaswamy P. 01-01-1992. Electrode heating in a wire-to-plane arc Physics of Fluids B, 4 2, 465-472Stauffer T.R.;Jog M.;Ayyaswamy P. 01-01-1992. The effective thermal conductivity of multi foil insulation as a function of temperature and pressur AIAA 27th Thermophysics Conference, 1992, , Huang L.;Jog M.;Cohen I.;Ayyaswamy P. 01-01-1991. Effect of polarity on heat transfer in the ball formation process Journal of Electronic Packaging, Transactions of the ASME, 113 1, 33-39Jog M.;Cohen I.;Ayyaswamy P. 01-01-1991. Breakdown of a wire-to-plane discharge: Transient effects Physics of Fluids B, 3 12, 3532-3536